EMF 1106 Series
Flake ICE Maker
ꢀ
ꢀ
Produces up to 1152 lbs. (524 Kgs.)* of ICE per day
Constructed from sturdy, corrosion-resistant
300 series stainless steel
ꢀ
ꢀ
Only 16 inches wide
Available with an air-or water-or
remote-cooled condenser
EMF 1106 on a B55 Bin
ICE-O-Matic is the Best ICE Making Solution for:
Hard Water, Food Safety and Tight Spaces
Problem
Solution
Tight-Fitting Spaces
Maximum ICE
Kitchen space utilization
Maximum ICE production in a minimum amount of space :
• No additional side clearance required on a
30 inch wide bin
• Maximum ICE production in a 16 inch cabinet
• Works on all industry dispensers and bins
Poor Ice Quality
Dependable ICE
Ice is too wet and soft
ICE-O-Matic Flake ICE Makers remove excess water by
pushing the flaked ICE through an extrusion process.
The result is high quality flaked ICE which is ideal for
medical, supermarket or restaurant applications.
Operating Environments
ICE-O-Matic Tough
Built to last?
Constructed with a brass evaporator and rugged stainless
steel transport system enclosed in polyurethane insulation
Dirty Air Filter
Filter-Free Air
Forget to change the air filter?
No air filter to change
*Rated at 70 ° (21°) Air / 50° (10°) Water
|