INSTALL INSTRUCTIONS C-TCB-1
TELESCOPING COMPUTER BASE
1992-1997 CHEVROLET CAPRICE, 1997-2002 LUMINA &
1995-2008 FORD CROWN VIC
TOOLS REQUIRED:
Ratcheting Wrench
Standard & Metric Socket Set
Power Drill
Drill Bit Set
HARDWARE:
QTY DESCRIPTION
PART #
2
1
1
2
¼” x 3/4” Self tapping screw
5/16-18 Nylock Nut
5/16-18 x 1” Hex head bolt
5/16” Flat Washers
GSM33060-1
GSM30017
GSM33012
GSM31006
SUB ASSEMBLY:
1. Confirm receipt of all parts.
2. Loosen front and rear passenger seat bolts.
Telescoping
Pole
Tighten last
Lateral (forward)
Brace Arm Assembly
Pole Support
Assembly
Side Brace Arm
Assembly
will be under passenger’s legs.
Slide under front
passenger inboard
seat bolt
Slide under front
passenger outboard
INSTALLATION:
seat bolt
1. Slide base of the pole
support
assembly under the front inboard (closest to the transmission hump) seat base. Slide the side
brace arm under the front outboard (closest to the door) seat base.
2. Attach side and forward brace arms to pole support assembly with 5/16” x 1” screw. (Do not
tighten yet). Align the holes of the seat base, the pole support assembly, side brace arm and
floor holes. Firmly tighten all four seat bolts without over tightening.
3. Using two ¼” x ¾” self tapping screws, drill holes and attach lateral (forward) brace arm to
vehicle floor or transmission hump.
4. Tighten the hex head screw that attaches the brace arms to the telescoping post when
finished.
C-TCB-1_INST_9-07
|