Operation & Installation Guide
MFFS2054F84FE0809
ENGLISH
Model 2054F
Model 2084F
Read These Instructions Very Carefully!
Home and Office Security Safes
Overview of Your Safe
WELCOME!
Your new First Alert® Fire Theft Safe™ will provide years of safe and secure
protection for your valuables, important documents and other personal items.
All First Alert® safes are designed and built using the highest manufacturing
standards to ensure maximum user satisfaction under a variety of conditions.
With proper care, your First Alert® safe will provide “Peace of Mind” for many
years to come.
Thank you and Enjoy!
The following list outlines the items and quantities of each included with
your new safe. Please carefully check the list to confirm all items have been
received. If any item is missing, then please contact Customer Service
@ 1-800-223-8566.
Package Contents
All Models
1 First Alert® Firesafe
1 Operation & Installation Guide
2 Companion Entry Keys
Models 2054F (only)
1 Bolt-Down Kit Including:
1 Mounting Template
4 Break-off Bolts
4 Washers
1 Removable Shelf
Models 2084F (only)
1 Adjustable Shelf
4 Shelf Support Clips
Important: DO NOT RETURN SAFE TO STORE
If you are missing parts, have difficulty programming your safe or
have any other questions pertaining to its proper use and care, DO
NOT RETURN your safe to the store. Please contact Consumer Affairs
at 1-800-223-8566 (USA & Canada) for assistance.
Home and Office Security Safes
1
Opening & Closing Your Safe
Opening The First Time
The dial is preset to the fourth (last) number in the combination. The safe door
should open when you insert the Companion Entry Key (round top), turn to the
right and pull the door open. The dial may move in transit, making it necessary
to dial the combination before opening the first time We recommend
trying the following combination procedure with safe door open first.
Your Combination
The combination for your safe can be found imprinted on the inside back cover
of this Operation and Installation Guide. It is a pre-set 4 number sequence that is
unique to your safe and cannot be changed. It is recommended that you keep this
Operation and Installation Guide in a secure place. NEVER store this Guide inside
the safe.
Opening Safe with Combination Dial
1. Turn the dial LEFT (counter clockwise) three times to clear prior settings.
2. Begin by placing dial on 0 (zero).
3. Turn the dial LEFT, passing the first combination number FOUR (4) times and
stop at the number on the fifth time around.
4. Turn the dial RIGHT, passing the second combination number TWO (2) times
and stop at the number on the third time around.
5. Turn the dial LEFT, passing the third combination number ONE (1) time and
stop at the number on the second time around.
6. Turn the dial RIGHT and STOP on the fourth combination number.
7. Insert the Entry Key into the key lock, turn to the right, and pull the door open.
Closing & Locking The Safe
1. When open, the key is turned right (the unlocked position).
2. Close the safe door and turn the key to the left.
3. Remove the key and spin the combination dial twice.
Frequent Key-Only Access
When circumstances require frequent, quick and convenient access for limited
periods during the day, you may choose to keep the commbination positioned
on the last number and lock only the keylock. However, the safe is not fully
locked until spinning the dial.
Important: REDUCED LEVEL OF SECURITY
The safe is ONLY FULLY LOCKED after turning key to the locked position and spinning
the dial. For your security, we recommend always locking both the combination dial
and key lock for the highest level of protection & security.
2
Additional Features: Removable Shelves
Shelves
Removable Shelf (Model 2054F only)
To remove the shelf, simply lift it up and tilt it on a sufficient angle to provide
clearance for removal.
Adjustable & Removable Shelves (Model 2084F)
These models are designed with 5 position adjustable shelves to allow greater
flexibility and further accommodate your particular security storage needs.
To Install:
SUPPORT
GUIDES
Your Shelf and Shelf Support Clips have been
shipped inside your safe and wrapped for protection
from damage during shipping.
1. Remove Shelf and (4) Shelf Support Clips
from protective wrapping.
2. Determine the desired position of your shelf
and note the corresponding Support Guide
Slots (2 on each side of interior walls) that
are best suited to support the shelf in that
position.
3. Install the (4) Shelf Support Clips in the same
position on all four support guides.
4. Install shelf into position by placing it inside
the safe (tilting if necessary) at a point above
the desired position.
5. Once inside, lower it into position until
resting on Shelf Support Clips.
To change the position of the shelf:
Simply remove the shelf and reposition the (4) shelf
support clips by sliding them up and out of the
support slots and reinstalling them into the new
positions. Then reinstall shelf as described above.
Important: REMOVING SHELF
If you remove the shelf, it is strongly recommended that you DO NOT
DISCARD it. You may lay the shelf flat in the bottom of the safe to assure
full flexibility in the future.
Home and Office Security Safes
3
Additional Features: Bolt-Down Kit
Model 2054F (only)
Installing Your Safe
Certain models include a Bolt-Down kit with break-off bolts and a mounting
template for permanent mounting to a flat surface. Once the safe is installed
using the break-off bolts, it is permanent and cannot be easily removed.
Tools Required
4 Break-off Bolts (Supplied)
4 Washers(Supplied)
1 Mounting Template (Supplied)
1 Drill
1 Screwdriver
Important: SECURING TO FLOOR
Many consumers prefer to bolt their safe to the floor to
increase protection from theft and resistance to tipping.
If your safe was manufactured with bolt down holes pre-
drilled in the floor of the safe, bolting your safe to the
floor may provide additional theft deterrence.
If you have ANY QUESTIONS about how to accomplish
this, or are uncomfortable using the tools necessary
to complete this project, please check with your local
retailer, home center, or independent contractor.
4
Additional Features: Bolt-Down Kit
Model 2054F (only)
Installation Procedure
1. Choose a mounting location that is easily
accessible from both above and below.
2. Carefully position the template on the
location that you want to mount the safe.
3. Create the guide marks by pressing a sharp
tool through the circles at the four corners of
the template and into the mounting location.
4. Drill a hole (the diameter of the break-off bolt
shaft) through each guide mark.
Important: DON’T DRILL SAFE
Do not drill into the feet, bottom or any other
part of safe! Doing so will ELIMINATE THE FIRE
PROTECTION that has been designed into your
safe and invalidate all stated warranties.
5. Before attaching the safe, you should check
carefully that the 4 holes you have drilled
match up precisely with the holes that have
been pre-drilled in the bottom of the safe.
Note: On certain models, It may be necessary
to remove the rubber foot pads that are
screwed into the bolt-down holes at the
factory.
6. Once you have confirmed that the holes
are aligned and in the location you desire,
install the break-off bolts and washers from
underneath the mounting location (through
the furniture or shelf), and into the pre-drilled
holes in the safe.
7. Turn bolts until the screw heads break off.
Home and Office Security Safes
5
Consumer Affairs
Your Safe’s Unique Identification Numbers
When contacting Consumer Affairs, you should be prepared to supply some
important information that specifically identifies your safe. This information is
extremely important to assuring prompt and accurate customer assistance.
It is strongly recommended that you identify and record the following information
in the “Safe Identification Record” form located on the inside back cover of this
manual:
Model Number
Serial Number
Key Number
Locating Model and Serial Numbers
Most First Alert® safes include a small metallic silver or gray tag affixed to one
of the surfaces. This tag is usually located on the front or right side of the safe.
This tag contains the Serial Number, and on selected models a similar tag is
attached containing the Model Number. If a Model Number tag is not attached
to the safe, then it can be located on the front or side panel of the box that the
safe was packaged in. Write this number down for future reference.
Key Number
The Key Number is located on the key. If you do not have the key, the number
is also imprinted on the Emergency Override Key lock. See Emergency Override
Key, page 3, for instructions on locating this lock.
Important: DO NOT REMOVE TAGS!
In case your safe becomes inoperable or you lose your keys, these identification
numbers will be needed to correct the problem. It is recommended that the
number tags remain in place on the safe. If removal is necessary, then they
should be attached to the inside back cover of the Operation and Installation
Guide. Store in a safe and secure place for future reference.
6
Consumer Affairs
How to Contact Us
Phone: 1-800-223-8566 (USA and Canada)
Monday through Friday, 7:30 am to 4:30 pm Pacific Standard Time
Mail:
Attn: Consumer Affairs Dept.
BRK / SISCO
2835 E. Ana Street
Rancho Dominguez, CA 90221
EUROPE
email: [email protected]
Ordering Replacement Keys
If a key becomes misplaced or you would like additional keys, you may conveniently
purchase them from our Consumer Affairs Department. You must supply the following
information to assure accurate processing:
• Name / Address / Telephone
• Safe Model Number / Serial Number
• Key Number (located on the key and on the Emergency Override Key lock)
• Number of keys requested
• E-mail address if available
In the USA, replacement keys are available for a fee and credit card orders are accepted
by telephone or via our web site. Checks or Money Orders are required for orders
received by mail and should be made payable to SISCO. Contact our Consumer Affairs
Department for costing information prior to ordering.
Home and Office Security Safes
7
Use, Care and Maintenance
Appropriate Use of Your Safe
First Alert® fire safes protect paper records and many other valuables.
Verified fire protection for:
Memory sticks, CD’s & DVD’s, USB Drives.
This product is NOT INTENDED to protect audio or video cassettes, floppy discs,
data cartridges, film and photos or photo negatives
Testing shows that the interior temperature of the safe remains below 350°F
(177°C) for 1 hour during a fire up to 1700°F (927°C) when used properly. Your
safe must be closed and latched in order to properly protect the contents from fire.
Moisture Warning
We recommend that you place delicate items such as pictures or intricate jewelry
into an air-tight container before storing them in your safe. Avoid placing your
safe in areas of high humidity. For optimum performance, the safe should be
opened and aired out for at least 20 minutes every two weeks.
Firearms Warning
This safe is not designed to store medication, items with combustible content,
guns or other weapons. Please contact BRK / SISCO at 800-223-8566 or shop
firearms or medication.
Pearls
Because pearls sustain heat damage at temperatures below 350° F, we advise
that you DO NOT store pearls in this fire safe.
Safe Care and Maintenance
When properly maintained, your safe will continue to provide protection for
many years. In order to ensure optimum performance of your safe, please
follow these simple precautions:
Clean Hands - Do not attempt to operate combination dial if your hands have
excessive dirt, debris, or liquids on them. Under normal circumstances, it is not
necessary to wash your hands before using the safe.
Clean Safe – To clean the outside surface of your safe, it is recommended that
you use a mild cleaner (e.g., window cleaner) to avoid scratching or discoloring
the surface. Do not use abrasive cleansers.
For future reference, store this Operation and Installation Guide in a secure area
away from the safe. DO NOT DISCARD!
8
Safe Identification Record
Recovering Lost Combinations
The following information is needed to provide you with your combination:
• Name / Address / Telephone
• Safe Model Number / Serial Number
• Key Number (located on the key and on the Emergency Override Key lock)
• E-mail address if available
Model Number
Serial Number
Key Number
4-Number Combination
LEFT FOUR (4) turns and continue to:
RIGHT TWO (2) turns and continue to:
LEFT ONE (1) turn and continue to:
RIGHT to:
Home and Office Security Safes
9
Limited Warranty
LIFETIME AFTER FIRE REPLACEMENT GUARANTEE
If your First Alert® Firesafe is ever damaged by a fire, BRK will replace it with a comparable model at
no charge to the consumer. Freight on the replacement unit is not included in the guarantee and
must be paid by the consumer.
For claims, submit your name and address, a photo of the damaged safe along with its Model
Number, and a copy of the Fire Department report to BRK Consumer Affairs as proof of loss. Once
the information is received, Consumer Affairs will contact you with further instructions.
LIMITED WARRANTY
BRK Brands, Inc., (“BRK”) warrants that for a period of five (5) years from the date of purchase, this
product will be free from defects in material and workmanship. BRK, at its sole option, will repair or
replace this product or any component of the product found to be defective during the warranty
period. Replacement or repair will be made with a new or remanufactured product or component.
If the product is no longer available, replacement may be made with a similar product of equal or
greater value. This is your exclusive warranty.
This warranty is only valid for the original retail purchaser from the date of initial retail purchase and
is not transferable. You must keep the original sales receipt. Proof of purchase is required to obtain
warranty performance. BRK dealers, service centers, or retail stores selling this product do not have
the right to alter, modify or in any way change the terms and conditions of this warranty.
This warranty does not apply to the finish on the product. This warranty does not cover normal
wear and tear of parts or damage resulting from any of the following: negligent use or misuse of
the product, use contrary to the operating instructions, disassembly, repair or alteration by anyone
other than BRK or an authorized service center, improper installation, or exposure to extremes of heat
or humidity. Further, the warranty does not cover Acts of God, such as fire, flood, hurricanes and
tornadoes.
BRK shall not be liable for any incidental or consequential damages caused by the breach of any
express or implied warranty. BRK is also not responsible for: costs associated with removing or
installing the product; damage or loss of the contents of the product; nor for the unauthorized
removal of the contents; or damages incurred during shipment.
Except to the extent prohibited by applicable law, any implied warranty of merchantability or
fitness for a particular purpose is limited in duration to the duration of the above Warranty Period.
Some states, provinces or jurisdictions do not allow the exclusion or limitation of incidental or
consequential damages or limitations on how long an implied warranty lasts, so the above limitations
or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also
have other rights that vary from state to state, or province to province, or jurisdiction to jurisdiction.
|